Learning MIG Welding Screven GA

How to Enroll In the Right Welder Certification Course near Screven Georgia

Screven GA welding school graduateFinding the right welder school near Screven GA is an essential first step to launching your new occupation as a professional welder. But since there are numerous schools to select from, how do you know which ones to consider? And more significantly, once you have fine tuned your alternatives, how do you select the right one? Many prospective students start by checking out the schools that are closest to their residences. When they have found those that are within driving distance, they are drawn toward the least expensive one. Yes, location and tuition cost are important concerns when examining welder technical schools, but they are not the only ones. Other factors include such things as reputation, accreditation and job placement rates. So before initiating your search for a trade school to become a welder, it’s wise to establish a list of qualifications that your selected school must have. But before we examine our due diligence checklist, let’s talk a little bit about how to become a welder.

Welding Degree and Certificate Training

Screven GA welding trade school studentThere are a number of alternatives available to obtain training as a welder in a trade or vocational school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Engineering or Welding Technology, but are more advanced courses than most journeyman welders will need. Some programs are also offered along with an apprenticeship program. Following are short summaries of the most prevalent welding programs offered in the Screven GA.

  • Diploma and Certificate Programs are normally offered by technical and trade schools and take about a year to complete. They are more hands-on training in scope, designed largely to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or additional skills for working welders.
  • Associate Degree Programs will take 2 years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the diploma or certificate while still furnishing the foundation that prepares students to enter the workforce.

A number of states and municipalities do have licensing prerequisites for welders, therefore don’t forget to find out for your location of potential employment. As needed, the welding school you select should prep you for any licensing exams that you will need to take in addition to furnishing the appropriate training to become a qualified welder.

Welding Certification Choices

Screven GA welder working in constructionThere are several institutions that offer welder certifications, which assess the knowledge and skill level of those applying. Many Screven GA employers not only demand a degree or certificate from an accredited welding school, but also certification from a highly regarded agency such as the American Welding Society (AWS). Different certifications are available based on the type of work that the welder does. Just some of the things that certification can acknowledge are the welder’s ability to

  • Work in compliance with specific codes
  • Work with specific metal thicknesses
  • Work with various types of welds
  • Perform according to contract specifications

As earlier mentioned, many states, cities or local municipalities have licensing requirements for welders. Of those requiring licensing, some also require certification for different types of work. Certification is also a means to demonstrate to employers that you are an exceptionally skilled and experienced welder. So similarly as with licensing, look into the requirements for your location and make sure that the welder trade school you choose readies you for certification if needed.

Topics to Ask Welding Trade Schools

Questions to ask Screven GA welding schoolsAs soon as you have decided on the credential you want to obtain, a diploma, certificate or degree, you can begin to compare schools. As you are no doubt aware, there are numerous welding trade and vocational schools in the Screven GA area. That’s why it’s important to decide up front what qualifications your selected school must have. We have previously covered 2 significant ones that most people look at first, which are location and tuition cost. As mentioned, although they are essential qualifications, they are not the only ones that need to be considered. After all, the school you pick is going to provide the instruction that will be the foundation of your new career as a welder. So following are more factors you might want to evaluate before selecting a welder vocational school.

Accreditation. It’s very important that the welding technical school you decide on is accredited by either a national or a regional agency. There are two standard types of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school has, such as Welding Technology. So verify that the program you choose is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting agency, such as the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping ensure that you obtain an excellent education, the accreditation might also assist in obtaining financial aid or student loans, which are in many cases not offered in Screven GA for non-accredited schools. Finally, for those states or local governments that require licensing, they may require that the welder training program be accredited also.

Job Placement and Apprenticeship Programs. Numerous welder degree or certificate programs are provided in conjunction with an apprenticeship program. Some other schools will help place you in an apprenticeship or a job upon graduation. Find out if the schools you are reviewing assist in placing students in apprenticeships or have a job assistance program. These schools must have relationships with local unions and other metal working businesses to which they can place their students. More established schools may have a more substantial network of graduates that they can rely upon for placements. These programs can help students find employment and develop associations within the Screven GA welding community.

Completion and Job Placement Rates. The completion rate is the portion or percentage of students that start an academic program and complete it. It’s essential that the welding program you pick has a higher completion rate. A lower rate may indicate that the students who were in the program were unhappy with the instruction, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A high job placement rate will not only affirm that the program has an excellent reputation within the industry, but also that it has the network of Screven GA employer relationships to help students secure employment or apprenticeships after graduation.

Up-to-date Equipment and Facilities. After you have decreased your choice of welding schools to 2 or 3 options, you should think out visiting the campuses to look over their facilities. Confirm that both the equipment and the facilities that you will be trained on are up-to-date. Specifically, the training equipment should be comparable to what you will be working with in the field. If you are unsure what to look for, and are already in an apprenticeship program, ask the master welder you are working under for guidance. Otherwise, ask a local Screven GA welding contractor if they can give you some pointers.

School Location. Even though we already briefly covered the importance of location, there are a couple of additional issues that we need to address. You should keep in mind that unless you can move, the welding school you pick must be within driving distance of your Screven GA home. If you do opt to attend an out-of-state school, in addition to relocation costs there could be higher tuition fees for out-of-state residents. This is particularly true for welder certificate programs offered by community colleges. Also, if the school offers an apprenticeship or job placement program, often their placements are within the school’s regional community. So the location of the school needs to be in an area or state where you subsequently will want to work.

Small Classes. Personalized instruction is essential for a manual trade such as welding. It’s easy to get lost in larger classes and not get much personalized instruction. Ask what the typical class size is for the welding schools you are reviewing. Ask if you can attend some classes so that you can observe how much personal attention the students are receiving. While there, talk with several of the students and get their feedback. Also, talk with a couple of the teachers and find out what their welding experience has been and what certifications and credentials they hold.

Convenient Class Schedules. Some people learn a new trade while still working at their present job. Check to see that the class schedules for the schools you are considering are flexible enough to fulfill your needs. If you can only go to classes in the evenings or on weekends near Screven GA, make sure that the schools you are reviewing provide those options. If you can only enroll part-time, make certain that the school you select offers part-time enrollment. Also, ask what the policy is to make up classes should you miss any because of work, illness or family emergencies.

Online Welding Courses

student attending welding classes online in Screven GAWelding is very much a hands-on type of vocation, and therefore not very suitable for online training. However, there are a small number of online welding programs offered by various community colleges and trade schools in the greater Screven GA area that may be credited toward a degree or certificate program. These classes primarily cover such topics as reading blueprints, safety,, and metallurgy. They can help provide a beginner a basis to begin their education and training. However, the most significant point is that you can’t learn how to weld or work with welding materials until you actually do it. Obviously that can’t be performed online. These skills need to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is better suited for seasoned welders that want to advance their knowledge or possibly obtain a more advanced degree. So if you should come across an online welding degree or certificate program, be extremely cautious and verify that the greater part of the training is done on campus or in a workshop type of setting.

Attending a Welding School in Screven GA?

If you have decided to enroll in a welder training program in the Screven Georgia area, you may find the following information both informative and helpful about the location of your new school campus.

Screven, Georgia

Screven is a city in Wayne County, Georgia, United States. The population was 702 at the 2000 census. Although it was a railroad town as early as 1847, it was not officially chartered until August 19, 1907.

In 1857 the Savannah, Albany and Gulf Railroad Company's line from Savannah, Georgia to Screven (then known as Station Seven) was completed when then trestle was built over the Altamaha River at Doctortown. Prior to this, the tracks connected the town to Thomasville, then a popular resort destination for wealthy Northerners and Europeans. The town was named for Dr. James Proctor Screven of the Atlantic and Gulf Railroad. After Dr. Screven's death in 1859, his son John Bryan Screven took over the railroad and continued its development. Both men served as mayor of Savannah. A section of the tracks just outside Screven on the Little Satilla is still known as the Abutment, the name it was given during the construction of the tracks.

The town was originally in the 4th land District of Appling County and moved into Wayne County when the county lines were redrawn after the American Civil War ended. The Confederate States Army had a training camp, Camp Harrison, in Screven for a short time in the Fall of 1860. The soldiers came by train to Screven.

Pick the Best Welding Technical Program Screven GA

Choosing the best welder training program will probably be the most critical decision you will make to launch your new profession. You originally stopped by our website because you had an interest in Learning MIG Welding. However, as we have addressed in this article, there are several factors that you will need to examine and compare between the programs you are reviewing. It’s a necessity that any welder training program that you are evaluating includes a lot of hands-on instruction. Classes need to be smaller in size and each student must have their personal welding machine to train with. Classroom instruction should provide a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential provided, so you will need to ascertain what length of program and degree or certificate will best satisfy your needs. Each program offers different options for certification also. Perhaps the best means to research your short list of schools is to check out each campus and speak with the faculty and students. Invest some time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you decide on is the ideal one for you. With the right training, effort and commitment, the final result will be a new occupation as a professional welder in Screven GA.

 

The location could not be found.

 

Business Results 1 - 10 of 0